BASTL Instruments – GrandPA DIY Kit

169,00 Incl. 19% VAT

Grandpa is Bastl’s granular sampler module based on their famous microGranny and those two share the same sound core. A truly unique module for your rack!

Out of stock

Out of stock

SKU: 2112345678905 Category: Tag:

GrandPA has 2 trigger inputs to trigger 2 different samples and a CV input which is assignable to any sound parameter and signal Output. The CV input can be also used to trigger grain shift. Grandpa reads microSD cards accessible from the front panel and runs the same sound core as microGranny 2. For each sample you can adjust: sample rate, crush, grain size, shift speed, attack, release (full release is hold), start and end position.

FEATURES

  • granular sampler with microgranny 2.0 soundcore
  • plays wav files from the microSD card, 22050 Hz, 16 bit, mono
  • 12bit output
  • adjustable sample rate (can go up to 44.1 kHz)
  • trigger inputs for playing 2 different samples with different settings
  • each trigger input has a button to do the trigger manually
  • RGB led to indicate page (on each page the two knobs adjust different parameters)
  • crush distortion
  • adjustable grain size and grain shift (positive or negative)
  • digital attack decay envelope
  • start and end point
  • no interpolation between grain jumps
  • each sample has adjustable destination of CV input – it can go to any of the parameters
  • grain sync – CV input can act as trigger input for triggering the grain shift
  • can recognize 35 different samples on the microSD card (they need to be specific name)
  • 35 presets (all settings of the 2 samples is one preset)
  • CV input reacts in 0-10V range
  • handmade in Brno, Czech republic
  • front panel from oak wood, handmade custom knobs
  • breakout for FTDi USB adaptor for hacking, opensource firmware (see github)

Assembly difficulty: medium

LINKS

 

SPECIFICATIONS

  • 5 HP
  • 35mm deep (skiff friendly)
  • current +12 <50mA
  • PTC fuse and diode protected 10 pin power connector