The RCD Breakout adds features to the Rotating Clock Divider module. Six switches allow you to set the maximum Divide-by amount, Gate or Trigger mode, Counting mode, Spread mode, and Auto-Reset. The RCD Breakout requires the RCD to function, and does not use any extra power. This is a beginner-level kit.
- Gate Counting: Down/Up
- Gate/Trigger mode
- Divide range up to Divide-by-64
- Spread mode: Spread mode causes the output to “spread” evenly amongst the entire max division range (see manual).
- Auto-reset: 16/off
DIY Panel Templates:
The RCD is 4HP and 48mm (1.85″)
- +12V rail: __mA
- +5V rail: not used
- -12V rail: not used